16 Ga 3/4" 2-1/2" Finish Nailer

16 Ga 3/4" 2-1/2" Finish Nailer Review

16 Ga 3/4" 2-1/2" Finish Nailer

SENCO 490021R SLS20-HF, 1" 19-Gauge Hardwood and Laminate Flooring Stapler

SENCO 490021R SLS20-HF, 1" 19-Gauge Hardwood and Laminate Flooring Stapler Review

SENCO 490021R SLS20-HF, 1" 19-Gauge Hardwood and Laminate Flooring Stapler Feature

• Precisely drives staples at a 45 Degrees angle every time
• Lightweight and easy to handle at only 3.2 lbs.
• NeverLube design means no lubrication is ever required
• Front block adjusts for different floor thickness and tongue locations with no tools required
• Industry-exclusive safety controls staple placement

Includes SLS20-HF, 1-in 19-Gauge Hardwood and Laminate Flooring Stapler - 490021R

Floor Stapler for Installing Hardwood Flooring

Floor Stapler for Installing Hardwood Flooring Review

Floor Stapler for Installing Hardwood Flooring Feature

• Floor stapler (Hardcore Tools® Brand) light weight cast aluminum, colors may vary!
• Operates with any standard compressor between 60-100 PSI
• High-capacity magazine for reload time. Reliably drives staples at proper angle and depth.
• Non-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.
• We currently ONLY ship these TOOLS inside USA via fedex ground.

Floor Stapler for installing hardwood floors between 1/2 - 3/4 inches thick. Used by many contractors and DIY floor installers this tool works well for all skill levels. The sturdy long handle allows for great control and keeps you from breaking your back. The staple magazine holds 100 floor staples, and staple length can vary between 1 1/2" to 2" depending on what you need. The air inlet is standard 1/4". Air consumption is low at 4.5 CFM and allows you to use a small compressor. Input pressure should be controlled between 60 and 100 PSI. With a little practice this tool will allow you to lay hundreds of square feet per day. Depending on the type of wood you will need to vary the input pressure. Bamboo is very hard and brittle and requires a low pressure to prevent damage. Teak and some other very dense hard woods will require 100 PSI. You should test on a piece of scrap plank to make sure you are getting good results. The floor stapler is used by placing it on the edge of a piece of hardwood floor. The included mallet is then used to strike the actuator and fire the staple in. The most difficult part of the process is just moving the floor stapler around. Include in the kit is a Carrying Case, Floor Stapler , Safety Glasses, Air Tool Oil, Base Plate, S3 Hex Key S4 Hex Key S5 Hex Key Wrench, and Instruction Manual.

Bostitch TVA11 Trigger Valve Kit

Bostitch TVA11 Trigger Valve Kit Review

Bostitch TVA11 Trigger Valve Kit Feature

• Fits N52FN, N62FN, N79RH, N79WW, N80SB, N88RH, N88RH-2MCN, N88WW, N90PT, N95RHN
• Performance kits contain all the necessary parts to return your Bostitch tool to like-new performance

Includes Trigger Valve Kit - TVA11, Roll Pin, Lubricant

Arrow Fastener ETFX50 Heavy Duty Professional Electric Staple and Nail Gun

Arrow Fastener ETFX50 Heavy Duty Professional Electric Staple and Nail Gun Review

Arrow Fastener ETFX50 Heavy Duty Professional Electric Staple and Nail Gun Feature

• Lightweight, compact and well balanced for comfort and control
• Heavy-duty 10-foot cord for extended reach
• Heavy-duty solid-state electronic circuitry for longer tool life
• Exclusive on/off safety trigger locks for operator safety
• Patented jam-proof mechanism for virtually no misfiring; 90-day warranty

Professional Electric Staple/Brad Nail Gun With Blow Molded Case.

Bostitch EHF1838K Engineered Hardwood Flooring Stapler

Bostitch EHF1838K Engineered Hardwood Flooring Stapler Review

Bostitch EHF1838K Engineered Hardwood Flooring Stapler Feature

• Adjustable precision knobs adjust for ¼-Inch to ½-Inch laminated flooring
• Over-molded rubber grip for comfort and maneuverability
• Muffled rear exhaust to direct air away from workspace
• Non-Marring trip tips so you don't accidentally damage the flooring
• Easy sight tongue engagement so you hit the pocket every time

For use with solid or engineered hardwood and bamboo flooring, the Bostitch EHF1838K 18-Gauge Engineered Hardwood Flooring Stapler features tool-free, adjustable knobs to match the size of your flooring material. Non-marring tips prevent accidental damage, and easy-sight tongue engagement helps you hit the pocket with every staple. And because it's designed for comfort, the Bostitch EHF1838K lets you work all day with minimum fatigue.

EHF1838K 18-Gauge Flooring Stapler At a Glance: Designed for use with solid or engineered hardwood and bamboo flooring Easy-sight tongue engagement for correct installation No-mar tips prevent floor scratches or damage Adjusts between 5/16 inch and 7/16 inch for solid hardwood, or between 1/2 inch and 5/8 inch for engineered hardwood and bamboo applications Includes carrying case, no-mar tips, staples, and installation block Seven-year limited warranty

Overmolded rubber grip maximizes comfort and minimizes fatigue. View larger.

Adjustable knobs allow for tool-free adjustment. View larger.

Easy-Sight Tongue Guide, No-Mar Cap, and Oil-Free Operation
The Bostitch EHF1838K makes it easy for you to correctly install hardwood and bamboo flooring. An easy-sight tongue guide helps you accurately drive staples into the pocket--every time. Additionally, a non-marring cap ensures you won't scratch or mark your flooring material, and oil-free operation means you won't damage or stain your floor with accidental oil spills.

Designed for Comfort and Safety
At an easy-to-handle 3-1/2 pounds, the Bostitch EHF1838K can be used for long periods of time with minimum operator fatigue. The over-molded rubber grip offers increased comfort for all-day projects, and the quiet rear exhaust prevents blowback in your face. Additionally, a swivel air fitting keeps the stapler right where you want it, so you can move freely without getting tangled in the compressor hose.

Easily Adjusts to Your Flooring Size
Designed to work with almost any flooring size, the Bostitch EHF1838K features adjustable knobs for fastening flooring of varying thicknesses. Adjust between 5/16 inch and 7/16 inch for solid hardwood, or between 1/2 inch and 5/8 inch for engineered hardwood and bamboo applications.

Tool Specifications
The Bostitch EHF1838K takes 18-gauge, 1-inch to 1-1/2-inch staples. A magazine capacity of 100 staples keeps you in operation for longer periods of time--and reloading is fast and easy. A real workhorse, this stapler has a driving power of 160 inch/pounds between 70 and 120 PSI.

The Bostitch EHF1838K is backed by a manufacturer's seven-year limited warranty.

What's in the Box
Bostitch EHF1838K 18-Gauge Engineered Hardwood Flooring Stapler, carrying case, two spare no-mar tips, 1,000 staples, and installation block.

The Stanley Bostitch EHF1838K is an 18-Gauge Engineered Flooring Stapler. The Bostich EHF1838K is designed for fastening varyin dimensions of bamboo, exotic woods, and engineered flooring. The Bostitch Nailer has adjustable precision knobs for a wider range of thicknesses adjustment. Features: Designed for the varying dimensions of bamboo, exotic hardwoods and engineered flooring Adjustable precision knobs for a wider range of thicknesses adjustment Drives 18-gauge staples for engineered hardwood flooring 1/2-in to 5/8-in thick Features include non-marring, easy-sight tongue guide Oil-free design Operating pressures between 70 and 120 PSI What's In the Box: Stanley Bostitch EHF1838K 18-Gauge Engineered Flooring Stapler

Hardcore Tools Floor stapler nail gun

Hardcore Tools Floor stapler nail gun Review

Hardcore Tools Floor stapler nail gun Feature

• 2 in 1 Flooring Cleat Nailer / Stapler gun at fraction of the cost of a Bostitch Stapler!
• High speed pneumatic flooring cleat nailer/hardwood floor stapler lets you get the job done faster.
• We ONLY ship TOOLS inside USA via fedex ground. SAVE MONEY DO IT YOURSELF 4 CHEAPER!
• Color of tool may differ! QUALITY PRODUCTS @ QUALITY PRICES WHEN YOU SHOP WITH STERLINGTEK!!!
• Returns for UNUSED PRODUCT in ORIGINAL PACKAGING. MUST be within 7 DAYS from the date of PURCHASE.

Own your own professional craftsman grade tool for less than the cost of one or two weeks of tool rental. Do a professional installation of your beautiful hardwood flooring faster and easier. Our high-speed hardwood flooring, 2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1"" to 2"" length L-shaped cleat nails or staples on flooring thickness 1/2"", 5/8"", 3/4"", or 25/32"". Technical Information: Minimum Operating Air Pressure: 60 PSI 4 bar Maximum Operating Air Pressure: 100 PSI 7 bar Staple Length Range: 1"" - 2"" 25.4 mm-50.8 mm Staple Size: 16 Guage Staple Capacity :92 L-shaped Nail Length Range:1-1/2"" - 2"" 38.1 mm-50.8 mm L-shaped Nail Size: 15-1/2 L-shaped Nail Capacity:100 Air Inlet:1/4 inch NPT 6.35 mm Air Consumption:4.5 CFM 4.5 CFM Package Includes: Carrying Case 2 in 1 Flooring Cleat Nailer / Stapler Mallet Safety Glasses Air Tool Oil Base Plate S3 Hex Key S4 Hex Key S5 Hex Key Wrench-Special Instruction Manual.Operates with any standard compressor using pressure of 60 to 100 psi. High-capacity magazine reduces reload time. Precisely drives staples at proper angle and depth. QUALITY PRODUCTS @ QUALITY PRICES WHEN YOU SHOP WITH STERLINGTEK!!! The Hard Core Tools/SterlingTek name, images, and contents of this SterlingTek listing are protected by trademarks and copyrights. Copyright © 2009 SterlingTek.

WEN 61797 Magnesium Clipped Head Framing Nailer

WEN 61797 Magnesium Clipped Head Framing Nailer Review

WEN 61797 Magnesium Clipped Head Framing Nailer Feature

• Strong and precise nail release, ideal for construction projects
• Drives 2 3/16-Inch to 3 1/2-Inch nails (11 1/2 to 10 1/4 gauge) 100 nail capacity
• Lightweight magnesium body for strength and durability
• Adjustable exhaust deflector
• Includes lubricating oil, adjusting wrenches, safety glasses and custom carrying case

Wen 61797 Pneumatic Clipped Head Framing Nailer - General purpose nailer designed for bridging, framing, trusses, subflooring, sheathing, and decking. 35 angled magazine can reach tight work areas. Air pressure: 70 to 120 P.S.I. Drives 2-3/16" to 3-1/2" nails, 11-1/2 to 10-1/4 gauge. Uses 34 degree clipped head nail strips. Lightweight die cast body. Adjustable exhaust deflector. Rubber wrapped handle.

Superior Parts SP501468 Aftermarket Piston Driver for Paslode F250S & DuoFast DF 250-MC

Superior Parts SP501468 Aftermarket Piston Driver for Paslode F250S & DuoFast DF 250-MC Review

Superior Parts SP501468 Aftermarket Piston Driver for Paslode F250S & DuoFast DF 250-MC Feature

• Fits DuoFast DF250
• Also fits Paslode F250S

Superior Parts SP 501468 Aftermarket Piston Driver for Paslode F250S. Paslode aftermarket driver for Paslode framing gun F250S Positive Placement Framing Nailer. Also fits DuoFast framer DF250.

Factory-Reconditioned Bostitch U/MCN250 2-1/2-Inch Strapshot Metal Connector Nailer

Factory-Reconditioned Bostitch U/MCN250 2-1/2-Inch Strapshot Metal Connector Nailer Review

Factory-Reconditioned Bostitch U/MCN250 2-1/2-Inch Strapshot Metal Connector Nailer Feature

• Exposed nail tip places fastener point directly into connector holes for a faster, more precise application
• In-line magazine offers improved balance for added maneuverability
• Adjustable rafter hook allows user to hang tool on rafters and joists
• Exclusive nail management feature helps to prevent jamming (patent pending)
• Drives 1-1/2-Inch and 2-1/2-Inch STRAPSHOT fasteners as well as other paper tape collated metal connector nails

Includes 2-1/2-in Strapshot Metal Connector Nailer - MCN250-R, Carrying Case

Pneu Tools RNS-150 1-1/2" Joist Hanger Nailer

Pneu Tools RNS-150 1-1/2" Joist Hanger Nailer Review

The Pneu Tools RNS-150 single blow joist hanger nailer, item# RNS-150, drives 1-1/2" paper tape hardened hanger nails in both .131 and .148 shank sizes. Includes one year manufacturers warranty. The RNS-150 is extremely lightweight, fast, and inexpensive. It features a single shot system to maximize productivity, heavy duty belt hook, and compact design for the ultimate in user comfort. This hanger nailer is excellent for strap ties, joist hangers, framing hardware, and post caps.

APACH LNF-32AC Brad Nailer

APACH LNF-32AC Brad Nailer Review

APACH LNF-32AC Brad Nailer Feature

• 360 degree adjustable air deflector.
• Quick release nose cover.
• Optional single bump fire switch available.
• Belt hook available.
• Light weight @ 2.6 lbs.

Uses 18 gauge brad nails from 3/8" - 1-1/4'. Magazine capacity holds 100 brad nails.

Bostitch N79RH 1-3/4 to 3-1/2-Inch Round Head Framing Nailer

Bostitch N79RH 1-3/4 to 3-1/2-Inch Round Head Framing Nailer Review

Bostitch N79RH 1-3/4 to 3-1/2-Inch Round Head Framing Nailer Feature

• Aluminum housing for job site durability
• Extrudes aluminum magazine survives falls
• Rubber grip for comfort
• Adjustable dept-control for flush nailing
• Aggressive teeth design grips lumber for easy toe-nailing

1-3/4" - 3-1/2" Round Head Framing Nailer-Brand New - 21 Degree Plastic Collated Nails

Speedaire 3EVR2 Framing Nailer, 34 Deg, 2-3 1/2 In Range

Speedaire 3EVR2 Framing Nailer, 34 Deg, 2-3 1/2 In Range Review

Pneumatic Framing Nailer, Angled, Clipped Head Style, Paper Collation Type, Collation Angle 34 Deg, Fastener Range 2 to 3 1/2 In, Shank Dia 0.113 to 0.131 In, CFM per Shot 0.074, Required Pressure 70 to 100 PSI, Max Pressure 120 PSI, Magazine Capacity 87, Adjustable Top Exhaust Deflector Exhaust, No Mar Tip, Aluminum Housing, Color Green, 1/4 In Male Plug, Adjustable Trigger , Length 18 29/32 In, Width 4 13/16 In, Height 13 13/32 In, Tool Weight 7 Lb, Features Adjustable Trigger

Bostitch CAP2040ST-OL 3 HP (Peak) 4-Gallon Oil-Lubricated Stack Tank Air Compressor

Bostitch CAP2040ST-OL 3 HP (Peak) 4-Gallon Oil-Lubricated Stack Tank Air Compressor Review

Bostitch CAP2040ST-OL 3 HP (Peak) 4-Gallon Oil-Lubricated Stack Tank Air Compressor Feature

• 1.3 HP (peak) 13.5 amp induction motor with a cold start valve for fast off-the-line starts
• Oil-lubricated pump delivers 4.0 CFM @ 90 PSI for multiple tool sets
• 135 PSI max working pressure for breakaway tool performance
• Upgraded industrial quality pressure switch and regulator for an injury free career
• Patented shroud design and oversized head for improved cooling

Includes 3 HP (Peak) 4-Gallon Oil-Lubricated Stack Tank Air Compressor - CAP2040ST-OL