Freeman PCN65 2-1/2-Inch Coil Siding Nailer

Freeman PCN65 2-1/2-Inch Coil Siding Nailer Review

Freeman PCN65 2-1/2-Inch Coil Siding Nailer Feature

• Magnesium Construction
• Anodized aluminum and oilless parts for extended wear
• Shoots 15 degree nails ranging in size from 1 1/4-Inch to 2 1/2-Inch
• 360-degree Adjustable Exhaust
• 7 year limited warranty

Features: 360-degree Adjustable Exhaust, Magnesium Body, Anodized Aluminum Parts, High Quality Rubber O-Rings, Finger Depth Adjust, Air Filter / Dust Cap , Reversible Belt Hook, One Piece Driver Blade, Open Nose Design, Trigger with safety lock, with Goggles, Oil, & Wrenches included. Freeman PCN65 coil nailer can be used for variety of applications, such as cedar shingles, roof and wall sheathing, siding installation, wood box assembly, and fencing. It shoots 15 degree nails ranging in size from 1 1/4" to 2 1/2". Nails are readily available at most hardware stores using the same 15 degree nail as all name brand pneumatic siding nailers. The body of this gun is constructed of die-cast magnesium for low weight and durability.

Porter-Cable FCN200 Pneumatic Flooring Cleat Nailer

Porter-Cable FCN200 Pneumatic Flooring Cleat Nailer Review

Porter-Cable FCN200 Pneumatic Flooring Cleat Nailer Feature

• Drives -inch shape cleat nails from 1-1/2-inch to 2-inch
• Pneumatic driving action consistently drives fastener for better finished installation
• Unit comes fully assembled and ready for use right out of the box
• Strong, lightweight, die-cast aluminum housing
• Non-marring base allows user to drive fastener close to wall; Better balance for stability - tool sits upright for smoother floor installation

The Porter-Cable FCN200 Two-Inch Flooring Cleat Nailer drives 1-1/2 to 2-inch cleat nails quickly and efficiently. Durable and built to last, this nailer features a 100-cleat, rear-load, gravity-feed magazine with bypass pusher, and it has a well-balanced, stable design for dependable results in both traditional and engineered hardwoods.

The Porter-Cable FCN200 Two-Inch Flooring Cleat Nailer At a Glance: Drives L-shaped cleats from 1.5 inches to 2 inches Pneumatic driving action of 70-100 PSI Strong, lightweight aluminum housing Ergonomic design No assembly required

Durable, lightweight aluminum construction is heavy-duty without sacrificing comfort.

Balanced, Ergonomic, and Powerful
The FCN200 features a balanced, ergonomic design, and it stands upright for easy, stable use. It also has a low center of gravity that allows it to stand independently without falling over.

And because the FCN200 is made from durable, lightweight die-cast aluminum, it's heavy-duty enough to complete tough jobs, yet comfortable enough for extended use.

The FCN200 uses a compressor to provide air at approximately 70-100 PSI. It weighs just 13 pounds and arrives preassembled with an angled air hose nipple.

L-Shaped Cleat Extends Floor-Life
Whereas traditional flooring nailers use staple fasteners that don't allow for wood expansion and can shorten the life of a floor, the FCN200 utilizes an L-shaped cleat as its fastener. This cleat allows the floor to contract and expand naturally, even as it holds the floor in place.

And because standard 3/4-inch-thick solid hardwood flooring requires 2.0-inch cleats for secure installation, the FCN200 accepts cleats measuring from 1.5 to 2.0 inches. This means you can handle flooring materials of various thicknesses, including thinner engineered woods.

Additionally, the hammer head is short enough to allow the compressor to get close to the wall for installation of starting rows.

What's in the Box
FCN200; mallet; oil; wrenches; and 1/4-inch air fitting with dust cover.

SENCO FN65DA F-15 15 GA Fusion Finish Nailer

SENCO FN65DA F-15 15 GA Fusion Finish Nailer Review

SENCO FN65DA F-15 15 GA Fusion Finish Nailer Feature

• Patented reflex shot design
• Robust aluminum drive cylinder
• Selective drive switch
• Nose Mounted LED Light
• Thumbwheel Depth-of-Drive

Includes Cordless Fusion 15-Gauge Finish Nailer - FN65DA, Li-ion Battery, Battery Charger, Case

Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer

Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer Review

Hitachi NR83A2 Round Head 2-inch to 3-1/4-inch Framing Nailer Feature

• Round-head 2-inch to 3-1/4-inch framing nailer allows for single or contact actuation
• Tool-free depth adjustment, open-nose design; ANSI compliant
• Stainless steel magazine, comfortable rubber grip
• Includes protective bumpers, safety glasses; no carrying case
• 22 by 13 by 4-inches; 7.9-pounds; 1-year warranty

The Hitachi NR83A2 3-1/4-Inch Round-Head Framing Nailer offers great performance in a compact, lightweight package. The NR83A2 is best used for floor and wall framing, truss buildup, window buildup, construction of subflooring and roof decking, wall sheathing, and mobile home and modular home construction. With tool-less depth-of-drive adjustment and durable construction, the NR83A2 is built for accurate results and heavy-duty use, making it an ideal tool for construction workers, contractors and carpenters.

This framing nailer offers dual firing options and depth-of-drive adjustment for efficiency. View larger.

NR83A2 3-1/4-Inch Round-Head Framing Nailer Tool Specifications Nail Capacity 64-70 Magazine Angle 21° Air Inlet 3/8" Operating Pressure 70-120 psi Weight 7.9 lbs. Accessories Included 1 Pair Safety Glasses

Adjustable Depth of Drive for Precision
The NR83A2 features a convenient depth-of-drive adjustment knob located near the nose. Simply turn the dial half way to make quick, accurate modifications to the driving depth with no tools required.

Quick-Load Magazine for Reduced Downtime
For further convenience, the NR83A2 features a two-piece steel magazine that's designed for quick and easy loading of round-head plastic strip nails from two to 3-1/4 inches in length. The magazine has a nail capacity of 64-70 nails, which is equivalent to two nail strips. To replenish the magazine, simply pull back the nail feeder--the feeder will lock the nails in place.

Dual Firing Options for Precise or Continuous Driving
Featuring ANSI-compliant select actuation for making tool-less firing transitions, the NR83A2 Framing Nailer can be used for a variety of different applications. By simply sliding the selection control up or down with your hand, you can choose between intermittent and continuous firing. Intermittent firing is ideal for jobs that require precise driving, while the continuous setting can be used to fire nails at a rapid pace by using a bumping motion along the workpiece.

Designed for Comfort and Efficiency
Well balanced at just 7.9 pounds and measuring 21-13/16 x 4-1/4 x 13-3/8 inches (LxWxH), the NR83A2 is easy to maneuver. Its soft rubber grip provides optimum control and extended comfort for all-day jobs.

For further ease of use, a hardened toenail push lever will help the nailer stand up to wear and tear. And in case you get a jammed nail, the open nose design will make extraction a cinch.

Designed with a 3/8-inch NPT thread air inlet, the NR83A2 requires 70-120 psi operating pressure to function properly. It takes in air at a rate of 0.064 cubic feet per cycle at 100 psi.

The Hitachi NR83A2 Framing Nailer is backed by a five-year limited warranty.

About Hitachi: A Tradition of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

What's in the Box
NR83A2 Framing Nailer and safety glasses.

Lightweight with a soft rubber grip, the nailer is comfortable and easy to maneuver. View larger.

The Hitachi Full Round Head Framing Nailer with Depth Adjustment is used for floor and wall framing, truss build-up, window build-up, construction of subflooring and roof decking, wall sheathing, and mobile home and modular house construction. Operating PSI: 70 - 120, Fasteners Used: Round head nails, Fastener Sizes (in.): 2 - 3 1/4, Fastener Size (gauge): 113 - .131, Fastener Capacity Per Strip: 64 - 70, Adjustable Depth Control: Yes (tool-less), Coil or Strip: Strip, Inlet Size (in.): 3/8, Case Included: No, Tool Length (in.): 21 13/16, Tool Weight (lbs.): 7.9

Hitachi NV45AB2S 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer

Hitachi NV45AB2S 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer Review

Hitachi NV45AB2S 7/8-Inch to 1-3/4-Inch Coil Roofing Nailer Feature

• Powerful, lightweight, and well balanced nailer for roofing applications
• Adjustable depth of drive; bottom load magazine
• Lightweight and well-balanced
• Includes safety glasses, (2) hex bar wrenches (3 and 4 mm)
• Weighs 5.7 pounds; 5-year warranty

This tool’s daddy, the NV45AB, was a fine piece of machinery, but Hitachi took it back to the drawing board and after a few significant improvements, put this NV45AB2 coil roofing nailer on the market, where it collected awards and praise from all corners. Deserved, we think. There’s no more fiddling on the roof because the depth of drive adjustment is tool-free now, too. Hitachi dumped the racket-grip handle in favor of a great rubber grip which is much easier on the user. Rubber pads were incorporated into the metal body protectors, ensuring a firm grip on the shingles without slipping. Hitachi kept the best features of this nailer’s predecessor, too—-things like pneumatic feed and return (most nailers we’ve seen have spring return), which help power the tool through tar and buildup that might otherwise trigger a jam. Tough housing stands up to shingle scrapes, and a carbide-tipped push lever means long life for the tool’s nose. Even at a nice, light 5.2 pounds, this workhorse fires an impressive three nails per second. Roofers will like the changes.--Kris Jensen-Van Heste The Hitachi Side-Load Roofing Nailer's magazine, depth of drive and bullet-proof design make it the perfect nailer to handle any jobsite condition. The NV45AB2 is ideal for various construction applications such as the installation of asphalt roofing shingles and the installation of insulation boards. Operating PSI: 70 - 120, Fasteners Used: Roofing nails, Fastener Sizes (in.): 7/8 - 1 3/4, Fastener Size (gauge): .120, Fastener Capacity Per Strip: 120, Adjustable Depth Control: Yes (tool-less), Coil or Strip: Coil, Inlet Size (in.): 3/8, Case Included: No, Tool Length (in.): 9 27/32, Tool Weight (lbs.): 5.5

DEWALT DC616K XRP 18-Volt Cordless 1-1/4-Inch - 2-1/2-Inch 16 Gauge Straight Finish Nailer Kit

DEWALT DC616K XRP 18-Volt Cordless 1-1/4-Inch - 2-1/2-Inch 16 Gauge Straight Finish Nailer Kit Review

DEWALT DC616K XRP 18-Volt Cordless 1-1/4-Inch - 2-1/2-Inch 16 Gauge Straight Finish Nailer Kit Feature

• Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
• Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
• Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
• Contact trip lock-off allows trigger to be disabled when not in use
• Integrated LED lights for long life and durability; Top cap is impact resistant and easy to remove for troubleshooting

Harness the power and efficiency of pneumatic nailing with the DeWalt DC616K Heavy-Duty 16 Gauge Straight Finish Nailer Kit. Designed to work with DeWalt's extended run XRP 18-volt batteries, this nailer provides fast, consistent nail penetration in both soft and hard materials. You can select sequential operating mode to ensure precision placement of each nail or a bump operating mode that allows you to harness top speed. A unique engine design allows this tool to work as fast as you do, firing up to four or five nails a second for increased productivity. And at just 8.5 pounds, this tool is lightweight for easy maneuvering and reduced operator fatigue.

Whatever you're working on, you'll appreciate the little details that separate this intuitively designed tool from similar nailers. Integrated LED lights make it easy to ensure accuracy. An easy-to-operate contract trip lock-off disables the trigger when the tool is not in use for improved safety. The nosepiece is easy to access and clear tool-free if a nail jam occurs. And a six-position dial makes it simple to move between several applications without stopping to re-acquire exact depth settings, saving you time. Additionally, the straight, rear-load magazine is easy to handle for quick refills, and it will accept any standard 16 gauge nails. Included in this kit is a one-hour charger, an 18-volt XRP battery, a reversible belt hook that accommodates right- and left-handed workers, a no-mar tip, safety glasses, and a kit box for easy storage.

Bostitch F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium Housing

Bostitch F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium Housing Review

Bostitch F28WW Clipped Head 2-inch to 3-1/2-inch Framing Nailer with Magnesium Housing Feature

• 2- to 3-1/2-inch clipped head stick framing nailer
• Driving power: 1050-inch-pounds; pushbutton depth of drive
• Magnesium housing for durability; weighs 7.6-pounds
• Sets up as sequential- or bump-fire trigger
• Length: 20-inches; 7-year manufacturer warranty

Framing, siding, decking, attaching wood to masonry, you name it, this versatile and lightweight framing nailer from Bostitch does it all. This clipped-head nail gun is equipped with a patented pushbutton adjustable depth guide that sets the nail to desired depths quickly and conveniently. A depth-of-drive control of course means there’s no adjusting compressor pressure, but also that you don’t have to fumble for tools when you’re standing on a steep roof. Just set the compressor at 80 psi and adjust the depth as needed.

Weighing just 7.6 pounds, the tool handles great in tight quarters like attics and during otherwise shoulder-burning overhead tasks. The innovative design is a big plus when nailing top plates to floor joints or when crawling under that low deck to reinforce the new hot-tub. A factory installed sequential trigger and Bostitch’s exclusive Smart Trigger ensure optimal control and faster production. The trigger works as either a sequential or bump fire trigger. A notched, 16-inch layout indicator on the magazine helps achieve correct distance between studs in a matter of seconds. And, a lightweight magnesium housing means easy handling and unsurpassed durability.

The unit drives 2- to 3-1/2-inch wire-collated framing nails. One of the most powerful framers on the market, this nailer features 1,050 inch-pounds of driving power for tackling even toughest engineered lumber applications. And, bolt-on, steel wear guards with integrated rubber skid pads protect the tool from bumps and drops for durability and years of use. --Brian D. Olson

Bosch BNS200-18 18-Gauge Brad Nailer

Bosch BNS200-18 18-Gauge Brad Nailer Review

Bosch BNS200-18 18-Gauge Brad Nailer Feature

• Tool-less adjustable air exhaust
• Tool-less selectable trigger - easily switch between bump and sequential fire
• Tool-less adjustable depth of drive - adjust depth of drive on tool
• Narrow nose for excellent line of sight and slim body for better line of sight and better control
• In-line self cleaning air filter - keeps debris from the valve and o-ring improving life of tool

With its compact, durable design, the Bosch BNS200-18 18-Gauge Brad Nailer drives nails quickly and reliably without weighing you down. It features Bosch's exclusive "Full-Force Technology," which means the tool is specially engineered to direct 100% of its working energy to the fastener, eliminating wasted power and space.

The BNS200-18 18-Gauge Brad Nailer offers: "Full-Force Technology" for consistently flush results. A wide 60-120 psi operating range for small and large projects. Tool-less adjustments for quick, easy control.

A slim body and narrow nose give you total control in tight spaces. View larger.

With "Full-Force Technology," air powerfully drives the piston down the tool's cylinder. View larger.

Bosch Full-Force Technology
This nailer is part of a new line of Bosch tools, which utilize Full-Force Technology to consistently drive nails flush, even in industrial lumber. This revolutionary engineering works without return chambers that add bulk and weight and create wasted energy on the strike.

When the trigger is pulled on the BNS200-18, air drives the piston down the cylinder. As the piston strikes, air is exhausted out the front of the tool for 100-percent air power and no wasted energy.

Big Power in a Small Package
The BNS200-18 is 20% smaller than its competitors, but provides 10% more power, giving you high-performance results when driving 5/8- to 2-inch 18-gauge nails. The BNS200-18 offers an operating range of 60–120 psi, so you can quickly complete small woodworking projects or add detail and trim to larger projects.

The slim body and narrow nose give you an excellent line of sight and maximum control, even in tight spaces. And no-mar tip storage protects your tips.

This nailer is perfect for crafting and installing cabinetry, nailing in blind spots or around corners, hanging wall paneling, or repairing window and door casings. Also, it eliminates the need for pre-drilling, which can cause wood to split.

Measuring 2.25 x 9.75 x 9.0 inches (WxHxL) and weighing just 2.1 pounds, this handy tool won't weigh you down, even during heavy-duty, all-day jobs.

Tool-Less Operation for Ease of Use
The BNS200-18 offers the ease of straightforward, tool-less operation. Make adjustments to the air exhaust, fine-tune the depth of drive, clear out jams with the quick-clear function, and switch between bump and sequential firing with the selectable trigger--all without the need for a wrench or additional tools.

Prevents Tool Damage
To help ensure long-term, reliable use, the BNS200-18 features a dry fire lock-out, which prevents damage to the workpiece and the tool's internal components by eliminating blank firing. Additionally, this brad nailer comes equipped with an inline self-cleaning air filter that keeps debris away from the valve and O-ring, preventing wear, tear, and compromised performance.

The BNS200-18 comes with a one-year unconditional warranty.

What's in the Box
Nailer, one pair of safety glasses, one no-mar tip, and carrying case.

For more information, click on the images below
Bosch Nail Guns and Compressors
SN350-20F Full Head Framing Nailer	SN350-34C Clipped Head Framing Nailer	FNA250-15 15 Gauge Angled Finish Nailer	FNS250-16 16 Gauge Angled Finish Nailer	BNS200-18 18 Gauge Brad Nailer	STN150-18 18 Gauge Narrow Crown Stapler
RN175 Coil Roofing Nailer	CGT8-65W 8 Gallon 6.5 HP Gas Wheelbarrow Air Compressor	CET8-15W 8 Gallon 1.5 HP Electric Wheelbarrow Air Compressor	CET3-10 3 Gallon Electric Hand Carry Compressor	CET4-20 4 Gallon Electric Hand Carry Compressor	CET4-20W 4 Gallon Electric Compressor w/ Wheels

Includes 18 Gauge 2-in Brad Nailer - BNS200-18, Safety Glasses, No Mar Tip, Carrying Case

Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer

Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer Review

Bostitch N62FNK-2 15-Gauge 1-Inch to 2-1/2-Inch Angled Finish Nailer Feature

• 1-inch to 2-1/2-inch 15-gauge oil-free angled finish nailer
• Tool-free removable and angled magazine; adjustable depth control; bypass nail pusher
• Durable, lightweight magnesium housing
• Includes no-mar tip, 3 profile tips, 1,000 fasteners, durable plastic carrying case
• 11.63-by-3.13-inches; extremely light 3.8-pounds; 7-year limited warranty

Put the finishing touches on your projects with the Bostitch N62FNK-2 Angled Finish Nailer. A magnesium body makes this nailer durable and lightweight, and oil-free maintenance and an easy-load magazine make it easy to use. Adjustable settings let you set the perfect nail depth for the job, whether you're working with furniture, molding, or trim.

The Bostitch N62FNK-2 Angled Finish Nailer At a Glance: 400 in./lbs. of driving power Adjustable nail depth Lightweight, durable magnesium housing Includes 4 profile tips and 1,000 2-inch nails

1.25" to 2.5" nails are ideal for furniture projects or trim work. View larger.

With its lightweight magnesium body, this nailer is perfect for over-the-head jobs. View larger.

Angled profile tips help you drive nails at the proper depth and angle. View larger.

Give Your Home a Professional Finish
The N62FNK-2 Finishing Nailer is the perfect tool for tackling the detail work that makes your home stand out. Use this nailer with a standard air compressor to add trim around windows and doors, apply crown molding, or work on furniture projects. For a pristine finish, a choice of four angled profile tips ensures the perfect drive every time. Also, this nailer features oil-free operation, so it's easy to maintain and it won't stain your workpieces.

Adjustable to Match the Task at Hand
The N62FNK-2 has adjustable nail-depth settings and an operating range of 70 to 120 PSI, which means you can dial in the right depth for the job quickly and easily. And with a driving power of 400 in/lbs, you can easily set 15-gauge finishing nails into even the most challenging hardwoods with power to spare.

Additionally, the N62FNK-2 has a tool-free magazine that holds 130 nails (1.25-inches to 2.5-inches in length), so you can knock out plenty of work in a single load. For added convenience, the magazine removes easily for cleaning and jam clearing.

Lightweight, Durable Construction for Everyday Use
The magnesium construction of the N62FNK-2 Angled Finish Nailer means this tool is light enough to use all day, while still being strong enough to reliably use again and again. Measuring 3.13 x 11.63 x 14.69 inches (WxHxL) and weighing just 3.8 pounds, this tool is perfect for over-the-head jobs, such as mounting crown molding, hanging shutters, installing cabinets, and more.

When you've finished the job, the N66C-1 and profile tips store neatly in a protective carrying case.

The Bostitch N62FNK-2 Angled Finish Nailer is backed by a seven-year limited warranty.

About Bostitch
Stanley-Bostitch manufactures top-quality, innovative fastening tools and fasteners for industrial, construction, and home-improvement applications. Products include pneumatic staplers and nailers; compressors; manual staplers and tackers; coil-fed screw systems; rivet tools; glue guns; a broad assortment of collated nails, screws, staples and specialty fasteners in a variety of materials and finishes; and carton-closing staplers--many of them industry firsts.

What's in the Box
Finish nailer, 1,000 two-inch nails, carrying case, and four profile tips.