Porta-Nails 461A Portamatic Elevator 18 Gauge Adjustable Flooring Stapler

Porta-Nails 461A Portamatic Elevator 18 Gauge Adjustable Flooring Stapler Review

Porta-Nails 461A Portamatic Elevator 18 Gauge Adjustable Flooring Stapler Feature

• Used for 3/8" - 5/8" Solid Wood, 15 mm Bamboo & 3/8" - 5/8" Engineered Flooring.
• Designed With An Adjustable Shoe Base To Assist In Positioning The Nail Into The Nail Pocket.
• Two adjustment controls allow you to fine tune the staples position to assure proper placement and to prevent "Dimpling"
• Uses 18 Ga- 1/4-Inch" crown Staples In Lengths of 1", 1-1/4" & 1-1/2".
• Lightweight and durable for Professional use.

Use for 3/8" - 5/8" Bamboo, solid wood, and engineered flooring; Tool free adjustable shoe base; Two adjustments fine tune the staples position; Includes carry case and safety goggles; Safety is built into the shoe base; Uses 1" - 1 1/2" 18ga 1/4" crown staples; 18ga staples reduce the risk of splitting exotic and engineered floors; Operates on 70-90 PSI

Simpson Swan Secure S11A175RNBP 1-3/4-Inch by 0.120 Ring Shank Wire Weld 15-Degree T-304 Stainless Steel Coil Roofing Nails, 480 per pack

Simpson Swan Secure S11A175RNBP 1-3/4-Inch by 0.120 Ring Shank Wire Weld 15-Degree T-304 Stainless Steel Coil Roofing Nails, 480 per pack Review

Simpson Swan Secure S11A175RNBP 1-3/4-Inch by 0.120 Ring Shank Wire Weld 15-Degree T-304 Stainless Steel Coil Roofing Nails, 480 per pack Feature

• 304 Stainless Steel 15-Degree wire coil ring shank roofing nails
• 1-3/4-Inch by 0.120 stainless steel Coil Roofing Nails
• 480 Per Box
• Fits all standard 15-Degree coil roofing nailers
• See www.swansecure.com for more technical information

Simpson Swan Secure S11A175RNBP wire weld Coil Roofing Nails are guaranteed to exceed T-304 stainless steel requirements. These nails offer the ultimate corrosion resistance for use in all high quality siding, roofing, decking and trim boards. Sturdy re-sealable tubes packaging reduce damage and waste. These nails will fit in Hitachi, Max, Makita, Bostitch and other similar 15-Degree roofing nailers.304 Stainless Steel 15-Degree wire coil ring shank roofing nails1-3/4-Inch by 0.120 stainless steel Coil Roofing Nails480 Per BoxFits all standard 15-Degree coil roofing nailersSee www.swansecure.com for more technical information

Bostitch PN50 Mini Impact Nailer

Bostitch PN50 Mini Impact Nailer Review

Bostitch PN50 Mini Impact Nailer Feature

• Rubber grip designed to insulate and reduce vibration
• Weighs only 1 lb.
• 360° swivel air fitting for maximum accessibility
• Front exhaust directs air away from users palm
• Drives most common bulk finish, framing & timber nails

Includes Mini Impact Nailer - PN50, 360 degree swivel air fitting

PISTON NT65A2 NT65A3 Hitachi Replacement Part # 882402

PISTON NT65A2 NT65A3 Hitachi Replacement Part # 882402 Review

PISTON NT65A2 NT65A3 Hitachi Replacement Part # 882402 Feature

• Hitach Replacement Part
• 882402
• PISTON NT65A2 NT65A3
• Hitachi Power Tools

PISTON NT65A2 NT65A3

Bostitch FLN-150 1-1/2-Inch Flooring L-Nails, 1000-Per Box

Bostitch FLN-150 1-1/2-Inch Flooring L-Nails, 1000-Per Box Review

Bostitch FLN-150 1-1/2-Inch Flooring L-Nails, 1000-Per Box Feature

• Pack of 1-1/2-Inch L-shaped hardwood flooring nails
• Coated finish protects against damage
• For use with Bostitch MIIIFN flooring cleat nailer and Porter-Cable FCN200; Powernail 345 and 45; Primatech P210, H300, H330 and Q500; Senco SHF50, SHF15 and SHF10
• Package in box of 1,000--enough for 200-Square-Feet of flooring
• 2.6-Pound

FLOORING NAILS - Coated finish protets against damage. For use with Bostitch MIIIFN flooring cleat nailer and porter cable FCN200; Powernail 345 and 45; Primatech P210, H300, H330 and Q500; Senco SHF50, SHF15 and SHF10. 200 squared feet of flooring.

Max JP606H Battery for Max Cordless SuperFramer

Max JP606H Battery for Max Cordless SuperFramer Review

Max JP606H Battery for Max Cordless SuperFramer Feature

• Ni-MH 6.0-Volt (1.5ah)
• Battery should only be charged by Max JC610M charger
• Cordless nailers are great for light duty work or punch out

Max Battery For GS683RH

Driver Piston Kit, #20 For OFN2190

Driver Piston Kit, #20 For OFN2190 Review

Driver Piston Kit, #20 For OFN2190 Feature

• Vulcan #20 Driver Piston Kit 741-3511 OFN2190ORK
• SUPERIOR AIRCO WHLSE

For Superior Airco finishing nailer model # OFN2190 (Aubuchon Item # 633214).

2-in-1 Combination Air Floor Nailer/Stapler (Includes with goggles, hex wrenches, air tool oil, spacers, and screws)

2-in-1 Combination Air Floor Nailer/Stapler (Includes with goggles, hex wrenches, air tool oil, spacers, and screws) Review

2-in-1 Combination Air Floor Nailer/Stapler (Includes with goggles, hex wrenches, air tool oil, spacers, and screws) Feature

• Uses cleat nails 1-1/2" long to 2" long or floor staples 1" to 2"
• 80 staple, 100 cleat magazine capacity, top loading
• Rubber face slug hammer
• 90 PSI
• Comes with goggles, hex wrenches, air tool oil, spacers, and screws

Install hardwood floors gymnasium-tight. Prevents hammer marks. Designed for 1/2" to 3/4" floor panels. Comes with goggles, hex wrenches, air tool oil, spacers, and screws Air inlet diameter: 1/4" - 18 NPT Overall dimensions: 17-7/8" L x 3-1/16" W x 22-5/8" H Weight: 16.06 lbs.

HIGH GRADE Cadex 23 gauge pins pin nails, 2" (50MM) - 4000 PK

HIGH GRADE Cadex 23 gauge pins pin nails, 2" (50MM) - 4000 PK Review

HIGH GRADE Cadex 23 gauge pins pin nails, 2" (50MM) - 4000 PK Feature

• 2" (50MM) 23 Gauge pins, 4000 pk
• Rounded edges of pin result in less deflection than cheaper brands (pls. read description below).
• Well made product from Cadex, manufactuer of high grade finish nailers
• Fits all 23 gauge pinners rated for this length.

Cadex 23 gauge pins are considered the highest quality available, developed by the same company that markets the highly rated Cadex and Nikle 23 gauge tools. The slightly rounded edges result in less pin deflection in the wood than the cheaper square pins. If you are using 23 gauge in the first place, you are likely working on fine finishing or furniture. Yes, you can buy cheaper pins, but at a fraction of a penny a pin, why compromise on your project?

Cadex headless pins will fit all 23 gauge pinners including Cadex, Nikle, Bostitch, Senco, Porter Cable, Spot Nail, and others (within rated size specification of course).

Porta-Nails 470 Portamatic TL Hardwood Floor Nailer

Porta-Nails 470 Portamatic TL Hardwood Floor Nailer Review

Porta-Nails 470 Portamatic TL Hardwood Floor Nailer Feature

• Nails 1/2" ,5/8" and 3/4" Flooring
• Air chamber provides for rapid fire production
• Includes Non Marring Mallet
• Requires daily lubrication
• Powder coated finish for durability

Use T or L nails in the same nailer; Nails 1/2",5/8", and 3/4" flooring; Operates on 70-90 psi; Lightweight and durable aluminum body; Drives and sets nails with one easy blow; Integrated safety prevents accidental firing; Range of fasteners 1 1/2" - 2"; Stainless steel nails for ACQ available in the T & L nails; Includes non marring hammer and rugged carrying case; Replacement parts readily available; Free instructional DVD included

Porter-Cable COIL350 Round Head 1-1/2-Inch to 3-1/2-Inch Coil Framing Nailer with Magnesium Housing

Porter-Cable COIL350 Round Head 1-1/2-Inch to 3-1/2-Inch Coil Framing Nailer with Magnesium Housing Review

Porter-Cable COIL350 Round Head 1-1/2-Inch to 3-1/2-Inch Coil Framing Nailer with Magnesium Housing Feature

• Drives standard 15 degree wire-collated coil framing nails from 1-1/2-inch to 3-1/2-inch by .099-inch to .131-inch dia
• Lightweight magnesium housing
• Powerful, high-performance motor with tool-free adjustable exhaust
• Refined feed mechanism includes double cams and guides and quick-adjust support for all nail lengths
• Depth-of-drive adjustment for proper setting of nail heads; Selectable trigger - restrictive or contact actuation mode

Porter Cable's 3 1/2-Inch Magnesium Coil Framing Nailer is a powerful, lightweight framing nailer that features an ergonomically designed handle and depth-of-drive adjustment mechanism for better accuracy and easier handling. This heavy-duty framing nailer also features a refined-feed mechanism that offers a quick-adjusting support for various nail lengths. This magnesium-coil framing nailer from Porter-Cable is a rugged, impressively lightweight piece of equipment, ideal for framers who want the capacity that a coil system offers. The magnesium housing is several pounds lighter than regular models but still offers the durability you'd expect from a job site nailer. Since coil nailers are commonly used for repetitious tasks, a lighter tool is a big plus--especially if you're going to wield it for an entire eight-hour day. Also, its handle is ergonomically designed, and its rubber grip is slip-resistant and comfortable to hold. The nailer has an easy-to-use depth-of-drive adjustment; a powerful, high-performance motor with adjustable exhaust; a refined feed mechanism that includes double cams and guides; and quick-adjust for all nail lengths. This Porter-Cable model accepts standard 15-degree wire-collated coil framing nails from 1-1/2 to 3-1/2 inches. The kit comes with a 1/4-inch NPT air inlet and 1/4-inch male quick coupler (with dust cover), oil for the nailer, wrenches, and an operating manual. --Jonathon Tudor

Paslode 650527 3-Inch by .120 Ring Shank GalvGuard 1M Fuel and Nail Pack

Paslode 650527 3-Inch by .120 Ring Shank GalvGuard 1M Fuel and Nail Pack Review

Paslode 650527 3-Inch by .120 Ring Shank GalvGuard 1M Fuel and Nail Pack Feature

• For use only with Paslode's CF325 Cordless Framing Nailer
• New orange QUICKLODE Fuel offers a patented no-step design with no snapping, no twisting, no aligning. Just drop it in and go.
• The right amount of fuel packed in with the right amount of nails.
• GalvGuard hot dipped galvanized strip fasteners featuring Premium Corrosion and Streak Protection for use in all pressure treated lumber applications, including ACQ.
• Paslode's new 30 degree RounDrive Paper Tape nails have full round heads with patented paper tape collation

Fuel & Nail Combo Pack, 3' x .120, Ring Shank, Galvguard Premium Streak Protection, Roundrive, Full Head, 1,000 Count Collated Framing Nail, Comes With Orange Fuel Cell, For Use With Cf325 Cordless Framer #902200.

Bostitch F33PT 33-Degree Paper Tape Framing Nailer / Metal Connector Nailer

Bostitch F33PT 33-Degree Paper Tape Framing Nailer / Metal Connector Nailer Review

Bostitch F33PT 33-Degree Paper Tape Framing Nailer / Metal Connector Nailer Feature

• Drives 2- to 3-1/2-inch paper tape collated framing nails and 1-1/2- to 3-1/2-inch paper tape metal connector nails
• Metal connector capability includes interchangeable tip for use on joist hangers, hurricane straps, etc
• 1050-inches-per-pound of driving power for tough engineered lumber applications
• Includes 2 quick change nosepieces to convert tool to either framing or metal connector applications
• Lightweight magnesium design for added durability

Framing, siding, decking, installing metal connectors, attaching wood to masonry, driving big nails into hard engineered lumber--you name it--this versatile and lightweight framing nailer from Bostitch does it all. Two nailers in one, this framing gun includes two quick-change nosepieces to convert the tool for either framing or metal connector applications. A factory installed sequential trigger and Bostitch’s exclusive Smart Trigger ensure optimal control and faster production.

Operating in either bump- or sequential-fire modes, the tool’s lightweight magnesium housing means easy handling and unsurpassed durability. Weighing just 7.9 pounds, the tool handles great in tight quarters like attics and during otherwise shoulder-burning overhead tasks. The innovative design is also a godsend when nailing top plates to floor joints or when crawling under that low deck to reinforce the new hot-tub. A patented push-button, depth-of-drive control of course means there’s no adjusting compressor pressure, but also that you don’t have to fumble for tools or awkward switches when you’re standing on a steep roof. Just set the compressor at 80 psi and adjust the depth as needed.

The unit drives 1-1/2-inch STRAPSHOT fasteners as well as all 1-1/2- and 3-1/2-inch metal connector nails measuring .131 to .162 inches in diameter. An interchangeable tip helps place nails accurately for metal connector applications. One of the most powerful framers in its class, this nailer offers 1,050 in./lbs. of driving power.

For less downtime and more productivity, a notched, 16-inch layout indicator on the magazine helps achieve correct distance between studs in a matter of seconds. And, bolt-on, steel wear guards with integrated rubber skid pads protect the tool from bumps and drops for unsurpassed durability and years of use. --Brian D. Olson

What’s in the Box
Nailer, interchangeable tip

Grip-Rite GRTBN125 18 Gauge Brad Nailer, 1-1/4-Inch

Grip-Rite GRTBN125 18 Gauge Brad Nailer, 1-1/4-Inch Review

Grip-Rite GRTBN125 18 Gauge Brad Nailer, 1-1/4-Inch Feature

• Rotating belt hook
• Nail capacity - 110
• 360 Degrees tool-free air exhaust
• Tool-free depth adjustment
• No-mar pad protects work surface

The Grip-Rite GRTBN125 is a perfect example of Grip-Rite's dedication to exceptional quality and unsurpassed value. Features such as a rugged but lightweight (2.9 lbs) housing, a balanced and compact design for tight places and tool-free jam clearing make this unit efficient and easy to use. The GRTBN125 also features a tool-free depth of drive adjustment, a 360 Degrees adjustable exhaust and a fast and easy loading magazine that holds 110 nails. The GRTBN150 shoots 18 gauge adhesive collated brad nails ranging in size from 3/8-Inch to 1-1/4-Inch. Grip-Rite stands behind all of their products with a network of service centers and a 12-month warranty. Also included with the purchase of this tool: Carrying Case and Owner's Manual, Safety Glasses, All Required Hex Wrenches, Tool Oil and a Male Air Plug.Rotating belt hookNail capacity - 110360 Degrees tool-free air exhaustTool-free depth adjustmentNo-mar pad protects work surface

Generic 18 Gauge Air Nailer & Brad Gun - 5/8-Inch to 2-Inch

Generic 18 Gauge Air Nailer & Brad Gun - 5/8-Inch to 2-Inch Review

Generic 18 Gauge Air Nailer & Brad Gun - 5/8-Inch to 2-Inch Feature

• Outstanding value in a quality-built, essential 18-ga. air nailer
• Strong and lightweight (3.5lb) die-cast aluminum body for durability, rubber soft-grip for sure hold
• Quickly drives nails brads from 5/8" to 2" quick-release magazine holds up to

Outstanding value in a quality-built, essential 18-ga. air nailer 10 gauge air nailer and brad gun.

Senco FramePro 502 Full Round Head Framing Nailer

Senco FramePro 502 Full Round Head Framing Nailer Review

Senco FramePro 502 Full Round Head Framing Nailer Feature

• Drives 2-inch-3-1/2-inch smooth shank nails (Sencote or plain) and 2-inch-3-inch ring shank nails. Shank diameters-include .113, .120, .131 and .148.
• Equipped with a stretch comfort grip and a lightweight aluminum body.
• Comes with set of decals to personalize your tool.
• Adjustable depth-of-drive
• Powerful and lightweight-durable construction

Which Nail is Right for Your Job?

Drives 2"-3-1/2" smooth shank nails (Sencote® or plain) and 2"-3" ring shank nails.

Shank diameters include .113, .120, .131 and .148. TheSenco FP502FRH FramePro 502 Framing Nailer is a powerful and highly reliable full round head framing nailer that drives 2" to 3-1/2" nails for a wide range of applications. The FP502FRH Nailer requires 20-22 degree fasteners. The Frame Pro 502 can drive 2" to 3-1/2" smooth shank nails (Sencote® or plain) and 2" to 3" ring shank nails. Shank diameters of the FP502FRH include .113, .120, .131 and .148. Features: Drives 2" to 3-1/2" nails for a wide range of applications. Drives 2" to 3-1/2" smooth shank nails (Sencote® or plain) and 2" to 3" ring shank nails. Shank diameters of the FP502FRH include .113, .120, .131 and .148. What's In the Box: Senco FP502FRH FramePro 502 Framing Nailer

DEWALT D51822 Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer

DEWALT D51822 Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer Review

DEWALT D51822 Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer Feature

• 7.5 lb. magnesium housing and aluminum magazine result in one of the lightest nailers in the industry
• Unique engine design generates power to bury nails in both standard framing lumber and engineered lumber with minimal recoil
• Impact resistant exhaust deflector protects tool from damage to the cap
• Tool-free adjustable depth allows for quick and easy depth of drive setting
• Trigger lock-off allows trigger to be disabled when not in use

Whether you're building a fence or adding a deck to your backyard, the D51822's 900 in./lbs. of driving force will help you get the job done without sacrificing precision or comfort. This efficient framing nailer makes it a snap to alter the depth of drive without changing air pressure, and the adjustment is conveniently located right on the tool. There's also a clipped head makes for better precision and control. Lightweight and arriving with both bump and sequential triggers, the D51822 takes up to 80 31-degree clipped head nails measuring from two to 3-1/2 inches in length and from 0.133 to 0/131 inches in diameter. It also comes with DEWALT brand safety glasses and pneumatic oil. For one of the lightest models on the market, The DeWalt clipped head framing nailer sure packs some power. At just 7-1/2 pounds (thanks to its magnesium housing and magazine), the 51822 still delivers up to 900 inch/pounds of driving power. Its conservative 12-3/4-inch height lets you toe-nail where space is at a premium. DeWalt’s unique design buries nails even in engineered lumber with minimal recoil, putting less stress on your body. Ergonomics get another boost from the comfortable, curved trigger and shock-absorbing grip. Resetting your depth of drive is blessedly tool-free, fast and easy, and we also like the quick-release jam-clearing feature for its savings of time and frustration. Safety is a priority, with a dry-fire lockout that keeps the tool from firing when the magazine is empty, a trigger lock-off to disable the tool when not in use, and a steel exhaust deflector that protects the tool if it’s dropped. DeWalt even tucked a pair of safety glasses in the box. A reversible rafter hook will let you hang the tool from a rafter or keep it handy on your toolbelt.--Kris Jensen-Van Heste