Duo-Fast KN-1848 Stapler Rebuild Kit

Duo-Fast KN-1848 Stapler Rebuild Kit Review

Duo-Fast KN-1848 Stapler Rebuild Kit Feature

• All the O`Rings in Tool.
• Cap Gasket & Trigger Gasket
• Exhaust Seal
• Poppet Seal

Duo-Fast KN,KW & LFN Staplers & Trim Nailer Repair Kit. Includes all the O`Rings, Cap Gasket,Trigger Gasket, Poppet Seal & Exhuast Seal.

Hitachi NR90ADPR 3-1/2-Inch Clipped Head Framing Strip Nailer

Hitachi NR90ADPR 3-1/2-Inch Clipped Head Framing Strip Nailer Review

Hitachi NR90ADPR 3-1/2-Inch Clipped Head Framing Strip Nailer Feature

• Lightweight design at only 7 lbs. for comfort and control
• Tool-less firing mode and depth selectors for less downtime
• 2-piece anodized aluminum magazine for durability
• One step nail loading system for faster nailing
• Hitachi vibration isolation pads for extended tool life

The Hitachi Framing Nailer drives paper collated nails from 2in. up to 3 1/2in. long. At only 7 lbs., the NR90ADPR is 15% lighter than the leading competitive tools, making it easier to use all day while still providing the power of heavier, bulkier nailers. This nailer can be used for floor and framing, truss build-up, window build-up, subflooring, roof decking, wall sheathing and housing construction. Air Consumption (CFM): .09 @ 100 PSI, Operating PSI: 70 - 120, Fasteners Used: Clipped-head nails, Fastener Sizes (in.): 2 - 3 1/2, Fastener Size (gauge): .113 - .148, Fastener Capacity Per Strip: 86 @ .131, Adjustable Depth Control: Yes (tool-less), Coil or Strip: Strip, Case Included: No, Tool Length (in.): 18.2, Tool Weight (lbs.): 7

Bostitch SBCAPS 1000 Caps for Cap Stapler and Nailer

Bostitch SBCAPS 1000 Caps for Cap Stapler and Nailer Review

Bostitch SBCAPS 1000 Caps for Cap Stapler and Nailer Feature

• Bostitch caps for use with the SB150SLBC-1 Cap Stapler and N66BC-1 Cap Nailer
• 1-Inch plastic caps eliminate pull-through when installing felt, house wrap and foam board insulation
• The cap method proves to be 10 times faster than nailing by hand
• Comes in quantity of 1,000
• Backed by 7-year limited warranty

1'' caps for use with Bostitch cap stapler model

Porter-Cable FN250C 1-Inch to 2-1/2-Inch 16-Gauge Finish Nailer

Porter-Cable FN250C 1-Inch to 2-1/2-Inch 16-Gauge Finish Nailer Review

Porter-Cable FN250C 1-Inch to 2-1/2-Inch 16-Gauge Finish Nailer Feature

• Maintenance-free motor designed to deliver long life
• Internal piston catch for consistent max power on every shot
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Drives 16 ga. FN style finish nails from 1-inch to 2-1/2-inch length; Tool-free jam release mechanism for easy nail removal
• Included with nailer: 1,000 16-guage 2-inch finish nails, 1/4-inch fitting, safety glasses, and carrying case

The Porter-Cable FN250C 1-to-2-1/2-inch 16-gauge Finish Nailer comes with a maintenance-free motor for added reliability and long tool life. With the ability to drive 16-guage "FN" style finish nails from 1 to 2-1/2 inches long, this brad nailer features an internal piston catch for consistent maximum power on every shot and a rear exhaust to keep contaminates away from work. Also included is a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, tool-free jam release mechanism for easy nail removal, and a sequential style trigger with a lock off switch. Other features include a contact safety located behind the driver guide for better visibility, an adjustable belt hook, an integrated rubber grip for improved comfort, and a low nail reload indicator. With a 100-nail magazine (which can be loaded rear load and lock style), this nailer's sequential style trigger with lock off switch operates at 70-to-120 PSI for added versatility. Its strong and lightweight die-cast aluminum body Measures 10.6 x 11.8 inches and weighs 3.85 pounds.

Porta-Nailer 46093 1-3/8-Inch by .097-Inch Hardened Galvanized T-Nail (1,000 per Box)

Porta-Nailer 46093 1-3/8-Inch by .097-Inch Hardened Galvanized T-Nail (1,000 per Box) Review

Porta-Nailer 46093 1-3/8-Inch by .097-Inch Hardened Galvanized T-Nail (1,000 per Box) Feature

• Accessory fastener for 460 T Nailer
• 1-3/8" T Nail
• Hardened and galvanized
• Multi-purpose applications
• Wood to concrete/steel

These 1-3/8' hardened and galvanized T-nails can be used with projects ranging from wood to concrete and steel. They're compatible with the .Accessory fastener for 460 T Nailer1-3/8' T NailHardened and galvanizedMulti-purpose applicationsWood to concrete/steel

Hitachi NV75AG Round Head 1-3/4-Inch to 3-Inch Coil Framing Nailer

Hitachi NV75AG Round Head 1-3/4-Inch to 3-Inch Coil Framing Nailer Review

Hitachi NV75AG Round Head 1-3/4-Inch to 3-Inch Coil Framing Nailer Feature

• Drives both wire framing and plastic sheet siding collated coil fasteners
• Directional exhaust
• New side-load bucket with tilt-out feature for quick and easy fastener loading
• Accurate tool-less depth of drive
• Weighs only 5.5 pounds; 1-year warranty

The Hitachi NV75AG Coil Siding/Framing Nailer is a flexible pneumatic tool that is compatible with both wire collated and plastic sheet collated nails. This nailer is designed to drive three-inch nails, which are the most commonly used nails for framing, siding, fencing, decking, and many other construction applications. Its lightweight body, large-capacity magazine, and tool-less depth of drive make this nailer an ideal choice for construction workers, contractors, home builders, and other woodworkers.

This siding/framing nailer offers dual firing options and a high-capacity magazine for efficiency. View larger.

NV75AG Coil Siding/Framing Nailer Tool Specifications Nail Capacity 200-300 Magazine Angle 16° (wire) 15° (plastic) Air Inlet 3/8" Operating Pressure 70-120 psi Weight 5.5 lbs.

Safety glasses, three Allen wrenches, and a nose cap are included. View larger.

Dual Firing Options Offer Precise or Continuous Driving
Featuring selective actuation for making tool-less firing transitions, the NV75AG Coil Siding/Framing can be used for a variety of different applications. By simply sliding the selection control up or down with your hand, you can choose between intermittent and continuous firing. Intermittent firing is ideal for jobs that require precise driving, while the continuous setting can be used to fire nails at a rapid pace by using a bumping motion along the workpiece.

High-Capacity Magazine for Reduced Downtime
The NV75AG features a high-capacity side-loading magazine that's designed for quick, tool-less loading of wire collated and plastic sheet collated nails from 1-3/4 to three inches length. With a nail capacity of 200-300 nails--depending upon the nail size and type--the NV75AG is able to work longer with fewer refills.

Adjustable Depth of Drive for Accuracy
The NV75AG features a convenient depth-of-drive adjustment knob located near the nose. Simply turn the dial to make quick, accurate modifications to the driving depth with no tools required.

Designed for Comfort and Efficiency
With a lightweight aluminum body, the NV75AG weighs just 5.5 pounds and measures 10-11/16 x 13-5/16 x 5-3/16 inches (LxHxW), so it's easy to maneuver. Its soft rubber grip provides optimum control and extended comfort for all-day jobs.

For further ease of use, Hitachi equipped the NV75AG with an adjustable, 360-degree air deflector. Also, an included no-mar nose cap protects the workpiece and the tool, and a plastic shield deflects wire collation for safety.

Designed with a 3/8-inch NPT thread air inlet, the NV75AG requires 70-120 psi operating pressure to function properly. It takes in air at a rate of 0.064 cubic feet per cycle at 100 psi.

The Hitachi NT50AE2 Brad Nailer is backed by a five-year limited warranty.

About Hitachi: A Tradition of Innovation
Hitachi Power Tools (Hitachi Koki USA, Ltd.) provides professional-grade power tools for a variety of applications, including woodwork, metalwork, concrete, drilling, cutting, and fastening. Hitachi is a leader in power tool research and development and has achieved many firsts in the power tool industry. Today, Hitachi continues the tradition of innovation and engineering with new features in addition to classic quality.

What's in the Box
NV75AG Coil Siding/Framing Nailer, safety glasses, three Allen wrenches, and nose cap.

DEWALT D51180 Palm Nailer

DEWALT D51180 Palm Nailer Review

DEWALT D51180 Palm Nailer Feature

• Lightweight, compact design (Only 2.65 lbs.)
• Will drive all jobsite required fasteners (6d - 16d bulk nails)
• Durable full-metal housing to withstand jobsite abuse
• Magnetic tip for easy nail placement
• Leather comfort grip reduces vibration and prevents slipping;

Lightweight and versatile, the DeWalt D51180 Heavy Duty Palm Nailer drives all jobsite required fasteners (6d to 16d bulk nails). Its lightweight, compact design weighs only 2.65 pounds, and its durable, full-metal housing is designed to withstand jobsite abuse. Other features include a magnetic tip for easy nail placement and a leather comfort grip that reduces vibration and prevents slipping. This palm nailer comes with a leather comfort grip, a 1/4-inch fitting, and a pair of DeWalt safety glasses.

Freeman PBR50 18 Gauge 2-inch Brad Nailer

Freeman PBR50 18 Gauge 2-inch Brad Nailer Review

Freeman PBR50 18 Gauge 2-inch Brad Nailer Feature

• Anodized aluminum and oilless parts for extended wear
• Reversible belt hook
• Anodized aluminum rail
• Reload indicator
• 7 year limited warranty

The Freeman 18 Gauge, 2 Brad Nailer is perfect for those woodworking projects that need a higher degree of fastening strength. With a range of 3/8 up to 2, there is no project too big or too small for the 2 Brad Nailer from Freeman. The lightweight ergonomic design provides a good feel for the perfect balance during operation. This brad nailer operates on 60-100psi and utilizes Teflon O-rings to insure a longer life and trouble free operation. Uses standard 18 gauge brad nails and offers a seven-year limited warranty. Package includes: Reversible belt hook, goggles, oil, wrenches.

Senco A209809 18-Gauge-by-5/8-Inch to 1-1/4-Inch Electro Galvanized Variety Pack Brads

Senco A209809 18-Gauge-by-5/8-Inch to 1-1/4-Inch Electro Galvanized Variety Pack Brads Review

Senco A209809 18-Gauge-by-5/8-Inch to 1-1/4-Inch Electro Galvanized Variety Pack Brads Feature

• 1,200 Brads per pack
• Great for moldings picture frame assembly trim and cabinetry building
• Fewer tool jams than competitors
• Highest withdrawal values for fasteners
• Fits A125BN and A200BN AccuSet brad nailers,

SENCO BRAD NAILS *18 gauge *Fits Accuset brad nailers A125BN (Ace No. 2103661), and A200BN (Ace No. 2103679) *Use for furniture repair, toy building, cabinet and drawers, casebacks, small trim, baseboards, chair rails, picture frames, bird houses *Clamshell *Multi-Pack - 5/8", 3/4", 1", 1-1/4" - 1200 Brad Nails

Paslode 902200 Orange Fuel Cell #812299 for use in CF325 Framing Nailer

Paslode 902200 Orange Fuel Cell #812299 for use in CF325 Framing Nailer Review

Paslode 902200 Orange Fuel Cell #812299 for use in CF325 Framing Nailer Feature

• Drives 1200 nails guaranteed
• Easy to use
• No snapping or twisting, just load and go!
• For use with Paslode CF325 Cordless Framing Nailer part# 902200
• This item is not for sale in Catalina Island

Paslode Quick-Lode spare framing fuel cell has PowerBoost black tip coating that drives nails deeper into tough lumber even LVL. Fuel Cells are sold as each and have a shelf life of 21 months.

Campbell Hausfeld CHN10499 2-in-1 Brad Nailer/Stapler

Campbell Hausfeld CHN10499 2-in-1 Brad Nailer/Stapler Review

Campbell Hausfeld CHN10499 2-in-1 Brad Nailer/Stapler Feature

• Combination brad nailer and stapler ideal for specialty work
• Features rubber comfort grip, adjustable depth control and quick clear nose
• Ideal for trim work, crafts, paneling, cabinet assembly and more
• Side-loading magazine with capacity of 100 fasteners (18 gauge brad nails or 1/4-inch staples)
• Includes 1,000 1-inch brad nails, 1,000 1-inch staples, 1/4-inch industrial plug, 2 Allen wrenches, bottle of nailer oil, and high-impact carry case

Campbell Hausfeld 2 - in - 1 18 - ga. Nailer / Stapler. Superior versatility, GREAT LOW PRICE! There's a LOT you can accomplish with one of these in your hand. Stuff you just couldn't do without it. You can't finish trim with a stapler, and you can't attach wiring with a nailer. But you can get the tool that does both. From fastening insulation, to carpeting, to upholstery, to finishing door and window trim, you won't miss a beat... just change out your fasteners in the 2-in-1 magazine and get to it! The goods: Accepts 18-ga. brad nails 1/2"-1 1/4" long, and 18-ga. 1/4"-crown staples 1/2"-1 1/4"long; No-mar tip won't dent the wood; Adjustable depth control lets you control the depth of drive in various types of wood; Adjustable exhaust lets you easily change the direction of air exhaust away from the project; Quick-clear nose lets you remove nail jams quickly, reducing downtime; Rubber comfort grip for long periods of use.; Includes: 2-in-1 Nailer / Stapler ; 1,000-count 1" staples; 1,000-count 1" brad nails; 1/4" industrial plug- 1/4" NPT; 2 allen wrenches; Bottle of nailer oil; High-impact carry case.; Order yours today! Campbell Hausfeld 2-in-1 18-ga. Nailer / Stapler

Factory-Reconditioned Bostitch U/F28WW Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer with Magnesium Housing

Factory-Reconditioned Bostitch U/F28WW Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer with Magnesium Housing Review

Factory-Reconditioned Bostitch U/F28WW Clipped Head 2-Inch to 3-1/2-Inch Framing Nailer with Magnesium Housing Feature

• Lightweight magnesium housing weighs only 7.7 lbs
• More power: 1050 inch lbs for engineered lumber
• Tool free adjustable exhaust
• 4 stick magazine: holds up to 100 nails
• Patented push-button depth of drive

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes Wire Weld Framing Nailer - U/F28WW

Senco FinishPro 25XP 5/8-Inch to 2-1/8-Inch 18 Gauge Brad Nailer with Case

Senco FinishPro 25XP 5/8-Inch to 2-1/8-Inch 18 Gauge Brad Nailer with Case Review

Senco FinishPro 25XP 5/8-Inch to 2-1/8-Inch 18 Gauge Brad Nailer with Case Feature

• Drives a wide range of both slight-headed and medium headed brads to give you two tools in one.
• Weighs only 2.7 lbs. - the lightest weight available in a brad nailer - for easy maneuvering and handling in small places.
• Features easy side loading that allows you to choose brad length without adjusting tool.
• On-tool power adjustment alows the user to increase power by 30%
• A 360 Degree adjustable exhaust and belt hook

Lightweight and power-packed, the Senco FinishPro 25XP Brad Nailer comes loaded with all the features you need, plus a few more to make it easier and faster to finish a variety of installation and finish jobs. It boasts Senco's exclusive "NeverLube" design, and a convenient on-tool power adjustment that allows you to increase power by 30 percent.

The FinishPro 25XP Brad Nailer At a Glance: Drives 18-gauge brads from 5/8" to 2-1/8" Power adjustment increases power by 30% for longer brads and harder wood "NeverLube" technology for oil-free operation Overmold grip and trigger reduce fatigue Lightweight for easy maneuvering and all-day work

The FinishPro 25XP has all the features you need for installation and finish jobs. View larger.

Versatile and Powerful
With an operating pressure of 70 to 120 psi, the FinishPro 25XP drives both slight-headed and medium-headed 18-gauge brads from 5/8-inch to 2-1/8 inches.

It's ideal for a range of professional and home improvement jobs, including installing cabinets, decorative trim, and furniture trim; drawer and picture frame assembly; scribe molding, window beading, and more.

Power Adjustment
The FinishPro 25XP has the unique ability to increase or decrease the power output via a simple adjustment located directly on the tool. This feature increases the life of the tool by allowing you to choose the right power setting for the job.

The Standard setting--which is the factory setting--allows you to accomplish most jobs. The Turbo setting supplies a 30% increase in power for longer brads and harder wood applications.

And to help you make these adjustments quickly and easily, the FinishPro 25XP comes equipped with on-board wrenches.

Lightweight and Maneuverable
At only 2.7 pounds, the FinishPro 25XP is easy to maneuver, and light enough for all-day work. An on-board construction ruler makes quick work of taking measurements, while a thumb-wheel adjustable depth of drive drives nails to a consistent and controllable depth.

Designed to be user-friendly, the FinishPro 25XP comes complete with an exhaust that requires no tools to adjust, an overmold grip and trigger that reduce vibration and fatigue to help increase productivity, and an angled air inlet to keep the hose off the work surface when the tool is in the vertical position. To protect the work surface and to keep the tool from slipping out of position, the square nose safety design combines with a no-mar pad.

Finally, a handy belt hook lets you take the tool wherever you go.

The FinishPro 25XP is backed by a five-year warranty.

About Senco: Innovation Backed by Experience
For over 50 years, Senco has been setting quality and performance standards for the fastener industry. In fact, Senco was the true inventor of the pneumatic fastening industry way back in 1950, and they've been the leading innovator in fastener technologies ever since. As a company, Senco has achieved an unheard of ten thousand hours of fastener engineering expertise.

In just one year, their plant in Cincinnati alone uses enough wire to make 18 trips to the moon and back. Even more impressive is the fact that since 1996, Senco has sold over 500 trillion fasteners to trusted companies like Fleetwood, Champion, Merillat, Ashley Furniture, and other major manufacturers.

What's in the Box
FinishPro 25XP; wrenches; and operating manual.

Unique brad nailer designed for woodworkers, hobbyists, home improvers, and start up contractors. Provides any craftsman with ease of operation and maneuverability. Features up to 30% more power than traditional brad nailers. Soft grip handle gives extra comfort and control. Soft rubber bumper. 360 adjustable exhaust directs oil and dust away from wood surfaces. Neverlube adjustable depth drive allows precision countersinking at lower air pressure. Applications include: Cabinet work, book shelves, door casements, drawer building, interior trim, crown molding build ups, chair rails, and exterior finish trim. Tool weight: 4.4 lb. Accepts nail sizes: 5/8'' to 2 1/8''. 18 gauge. Capacity: 110 nails. Operating pressure: 80 to 90 P.S.I. Includes rugged plastic case. Couplers not included. 2 year limited warranty.

Freeman PFBC940 4-in-1 Mini Flooring Nailer/Stapler using 1 5/8-Inch 18 Gauge Nails or Staplers

Freeman PFBC940 4-in-1 Mini Flooring Nailer/Stapler using 1 5/8-Inch 18 Gauge Nails or Staplers Review

Freeman PFBC940 4-in-1 Mini Flooring Nailer/Stapler using 1 5/8-Inch 18 Gauge Nails or Staplers Feature

• Anodized aluminum magazine
• Anodized aluminum cylinder
• 360 Degree adjustable exhaust
• 4 nailer in one unit
• Tool-free depth adjustment

The Freeman PFBC940, 4-in-1 Mini Flooring Gun, has the ability to fasten Tongue and Groove flooring and various finishing projects. This nailer is ideal for 1/2-Inch and below engineered or solid tongue and groove flooring, also great for tacking down flooring while glue sets. The PFBC940 is extremely durable and ergonomically designed to provide extra comfort when working on your wood working projects. The PFBC940 quickly converts to a straight 18 gauge brad nailer which can be used for finish molding to complete your flooring project. This nailer/stapler is equipped with a comfort grip handle, 360 Degree adjustable exhaust, anodized aluminum cylinder, anodized aluminum magazine, air filter/anti-dust cap, tool-free depth adjustment and a reload indicator. The PFBC940 has an oil-free design that includes oil (which is not necessary; however, recommended), goggles and wrenches. Freeman Pneumatic nailers are manufactured under the strict guidelines to ensure professional-grade standards. Compatible Nails: 18 gauge glue collated brad nails and 1/4" crown staples from 5/8" - 1 5/8". Magazine Capacity: 100pcs.

Cadex CPB23.50 2" 23 Gauge Headless Pin & Brad Nailer with 6000 Pc Fastener Assortment

Cadex CPB23.50 2" 23 Gauge Headless Pin & Brad Nailer with 6000 Pc Fastener Assortment Review

Cadex CPB23.50 2" 23 Gauge Headless Pin & Brad Nailer with 6000 Pc Fastener Assortment Feature

• Built in air duster (blow gun) & Includes swivel coupler
• Anti dry fire mechanism
• Light weight & well balanced (weighs 2.6 lbs)
• Fine precision nose for easy viewing & aiming
• Operates on 1/2 Hp. or larger air compressor

The CPB23.50 50mm (2"") 23 gauge pinner wih air duster (blow gun) built in. Drives 23 gauge headless pins and brads from 5/8"up to 2". Painters love these tools - eliminates most filling! Much smaller indent than even 18 gauge, the 23 gauge pins still offer significant holding power, and in many applications are used in place of clamps for glue ups. And now with a built in air blower. Check these features:: 1. Light weight & well balanced 2. Fine precision nose for easy viewing & aiming 3. Operates on 1/2 Hp. or larger air compressor 4. Ideal for invisible fastening in all hardwoods 5. Accepts both 23 gauge pins and 23 gauge brads 6. Rear exhaust 7. Belt hook8. Cushion grip 9. Comes with carry case 10. Anti dry fire mechanism 11. No Mar Plastic nose tip INCLUDES 6000 FASTENER PACK ASSORTMENT