Porter-Cable PIN100 1/2-Inch to 1-Inch 23-Gauge Pin Nailer

Porter-Cable PIN100 1/2-Inch to 1-Inch 23-Gauge Pin Nailer Review

Porter-Cable PIN100 1/2-Inch to 1-Inch 23-Gauge Pin Nailer Feature

• Uses 23 ga. micro pin nails from 1/2-inch to 1-inch long similar to Senco models
• Tool automatically adjusts for different fastener lengths for esier loading and less problems with pins out of spec
• Convenient bottom-load magazine holds 170 micro pin nails
• Dual trigger feature
• Low nail reload indicator; Rubber comfort grip on tool handle

The Porter-Cable PIN100 1/2-Inch to 1-Inch 23-Gauge Pin Nailer takes care of all of your finishing projects, such as crown molding and other molding, and does it quickly and efficiently. It uses a dual trigger feature to fire the 23-gauge micro pin nails from the 170 pin bottom load magazine. This smart pin nailer even recognizes the length of the nail and automatically adjusts accordingly. The rubber comfort grip ensures hours of easy operation.

Porter-Cable PIN138 23-Gauge 1-3/8-Inch Pin Nailer

Porter-Cable PIN138 23-Gauge 1-3/8-Inch Pin Nailer Review

Porter-Cable PIN138 23-Gauge 1-3/8-Inch Pin Nailer Feature

• Uses 23-gauge headless and slight head pin nails from 5/8-Inch to 1-3/8-Inch length
• Long life maintenance free motor to keep from staining the work surface
• Includes: nailer, 2000 pin nails of 3/4-Inch, 1/4-Inch plug with cap, wrench, and carrying case
• Consistent power and penetration to sink 1-3/8-Inch nail sub-flush into oak
• Tool automatically adjusts for different fastener lengths for easier loading and less problems with pins out of spec

The Porter-Cable maintenance-free 23GA 13/8'' Pin Nailer is finally
here! Perfect for professional and serious woodworkers alike, the PIN
138 delivers serious holding power while keeping nail visibility to a
minimum.

Fastens materials that would normally split using larger tools.
Will countersink 1-3/8" nails into hard materials like Oak.
Dual-stack ring system minimizes internal friction resulting in no maintenance yet longer life.


Rear exhaust directs potential moisture and contaminates away from the work surface.
Narrow nose gives you improved visibility.
Removable non-marring tip eliminates wood indentations.
Extra non-marring tip is included and stored in the tool.
Weighs just 2.2 pounds.
Aluminum body and magazine construction for durability.
Reversible belt clip lets you keep the tool by your side when not in use.
Excellent for small trim decorative moldings, cabinet crown molding, raised panel doors, rope and bead molding, mantle building, wood joining, as well as light fastening and clamping applications.


Specifications:
Magazine capacity: 130 pins.
Firing modes: Dual trigger feature.
Operating pressure: 60-100.
Fastener type: 23GA headless and slight head pin nails.
Fastener range: 5/8" to 1-3/8".
Height: 7-1/2".
Length: 9-1/2".
Weight: 2.2 lbs.

Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer

Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer Review

Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer Feature

• 1/2-inch to 1-3/16-inch 23-gauge pin nailer; low-profile nose-piece tapers for clear site
• Adjustable high/lower power switch for depth control and longer life
• Lightweight and durable aluminum housing
• Includes nailer, oil, abrasive, and kit box
• 7.81 by 9.06 by 1.6 inches; 2.3 pounds; 7-year limited warranty

The Bostitch HP118K 23-Gauge 1/2-Inch to 1-3/16-Inch Headless Pin Nailer delivers the accuracy and comfortable handling you need to make quick work of detailed finish, trim, and woodworking projects. This pin nailer offers you the power of pneumatic action backed by Bostitch's long history of producing innovative fastening technology for dependable on-the-job performance.

The Bostitch 23-Gauge 1/2-Inch to 1-3/16-Inch Pin Nailer features: Tapered nosepiece for spot-on precision 60 in./lbs. driving power for secure nailing Wide range of 23-gauge pin nails for ultimate versatility Reversible Belt hook for added convenience

The kit includes the pin nailer, tool lubricant, and a set of 23-gauge pin nails, all transportable in an exclusive Bostitch carrying case. View larger.

The over-molded comfort grip is designed for easy, no-slip maneuvering. View larger.

The tapered nosepiece achieves precision for intricate work like picture framing. View larger.

Powerful, Adjustable Fastening for Precise, Clean Work
The Bostitch HP118K is well-suited for use with slim or delicate materials that might be split by an 18-gauge nail or brad. With this tool and set of 23-gauge pin nails, you can save time and money by preventing damage to work surfaces. An ideal choice for woodworking applications, the HP118K provides effective fastening for glue sets that are tough or impossible to clamp, and it will help you avoid the witness marks or holes that can be left by other driver heads, letting you create clean finished products.

Designed to keep you in control at all times, this nailer offers an adjustable high/low power control that sets pin depths without requiring you to adjust your compressor setting. It backs this precision with the ability to deliver 60 in./lbs. of driving power, so you can be sure that each pin is securely seated.

With the ability to handle 23-gauge headless pin nails that range from 1/2 inch to 1-3/16 inches, this nailer enables you to utilize a wide range of fasteners for job-specific performance. And its magazine capacity of 200 pins allows you to work without stopping to reload.

Ergonomic Design for Comfort and Convenience
The HP118K offers a full range of design features dedicated to smooth, safe, and intuitive use. It features a low-profile nosepiece that tapers down to the contact point which offers a clear line-of-site for perfect placement. An over-molded grip ensures slip-free handling, and it is balanced to sit comfortably in your hand during extended use. And, for added comfort while you work, the nailer's rear exhaust directs air away from your face. The pin nailer also features a reversible belt hook for convenience on the job.

Its compact body is easy to maneuver, which is of particular importance when doing intricate work like crafting custom cabinetry or picture frames, and, thanks to a durable, lightweight aluminum housing, it weighs just 2.5 pounds.

Reliable, Pneumatic Performance
This lightweight durable tool operates between 70 and 120 PSI and includes a 1/4-inch NPT fitting for easy coupling with your air hose and compressor.

This pin nailer is backed by a manufacturer's 7-year limited warranty.

What's in the Box
HP118K 23-Gauge Pin Nailer; 1/4-inch air fitting; 500 each of 1/2-inch pins, 3/4-inch pins, and 1-inch pins; tool lubricant; and carrying case.

Available Bostitch Fasteners:

Model # PT-2312-3M PT-2319-3M PT-2325-3M PT-2330-3M

Description 23 ga. 1/2" Headless Pin Nails - 3,000 ct. 23 ga. 3/4" Headless Pin Nails - 3,000 ct. 23 ga. 1" Headless Pin Nails - 3,000 ct. 23 ga. 1-3/16" Headless Pin Nails - 3,000 ct.

Adjustable high/low power control sets pin depth without changing compressor setting. Low profile nose piece tapers down to contact point for clear line of site. 19% greater pin capacity over competitive models for a wider range of fasteners. Fires fasteners 1/2'' to 1 3/16'' in size. Kit includes: Pin nailer, 1/4'' air fitting, 500 each of 1/2'' pins, 3/4'' pins, 1'' pins, and a case.

Grex P650L 23-Gauge 2-Inch Headless Pinner with Lock-Out

Grex P650L 23-Gauge 2-Inch Headless Pinner with Lock-Out Review

Grex P650L 23-Gauge 2-Inch Headless Pinner with Lock-Out Feature

• Lock-out mechanism that prevents dry-firing of tool
• Shoots fasteners up to 2-inch length easily, even in hardwoods
• Patented magazine design eliminates need to adjust for different fastener lengths
• Powerful motor penetrates fasteners through the hardest materials
• Narrow nose reaches tight areas and corners for detailed trim work

Grex has stayed true to their pledge of developing not only innovative products, but quality products for professionals and DIYers alike. The addition of their P650 upholds the quality standard for Grex pinners. Not only can the pinner drive the minute 23 gauge headless pins perfectly into the hardest woods, but it can do so from 1/2 inch length pins all the way up to 2 inch. It has all the desired features of its predecessor P635, and like the P645L, has the lock-out mechanism that prevents dry firing of the tool. Versatility is an understatement. Comes with a hard plastic case, 2 no mar tips, non-detergent oil, allen set and safety goggles.