Hardcore Tools® HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Pneumatic 2 in 1 Flooring Cleat Nailer / Stapler

Hardcore Tools® HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Pneumatic 2 in 1 Flooring Cleat Nailer / Stapler Review

Hardcore Tools® HARDWOOD FLOORING 1-1/2-Inch to 2-Inch Pneumatic 2 in 1 Flooring Cleat Nailer / Stapler Feature

• 2 in 1 Flooring Cleat Nailer / Stapler Light weight die-cast aluminum body. Colors may vary!
• Operates with any standard compressor using pressure of 60 to 100 psi.
• High-capacity magazine reduces reload time. Precisely drives staples at proper angle and depth.
• Non-marring adjustable base plates allows for 1/2 to 3/4 inch hardwood floor installation.
• We currently ONLY ship these TOOLS inside USA via fedex ground.

Our high-speed hardwood flooring,  2 in 1 pneumatic (powered by air compressor) cleat nailer / stapler is designed to install tongue and groove flooring using 1" to 2"  length L-shaped cleat nails or staples on flooring thickness 1/2", 5/8", 3/4", or 25/32". Technical Information: Minimum Operating Air Pressure: 60 PSI 4 bar Maximum Operating Air Pressure: 100 PSI 7 bar Staple Length Range: 1" - 2" 25.4 mm-50.8 mm Staple Size: 16 Guage Staple Capacity :92 L-shaped Nail Length Range:1-1/2" - 2"  38.1 mm-50.8 mm L-shaped Nail Size: 15-1/2 L-shaped Nail Capacity:100 Air Inlet:1/4 inch NPT 6.35 mm Air Consumption:4.5 CFM 4.5 CFM Package Includes: Carrying Case 2 in 1 Flooring Cleat Nailer / Stapler Mallet Safety Glasses Air Tool Oil Base Plate S3 Hex Key S4 Hex Key S5 Hex Key Wrench-Special Instruction  Manual

Pneumatic Flooring Nailer By Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring

Pneumatic Flooring Nailer By Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring Review

Pneumatic Flooring Nailer By Hardcore Tools® - Great for Bamboo, Oak, Maple, Brazilian Cherry, Hickory, Walnut, Hand Scraped, Prefinished and Engineered Wood Flooring Feature

• Pneumatic flooring nailer Hardcore Tools® Brand) light weight cast aluminum, colors may vary!
• Operates with any standard compressor between 60-100 PSI
• High-capacity magazine for reload time. Reliably drives staples at proper angle and depth.
• Non-marring base plates are adjustable for 1/2 to 3/4 inch hardwood floor installation.
• Durable plastic carrying case for tool, inclues mallet, oil, hex tools, o-rings and safety googles.

Pneumatic Flooring Nailer for installing hardwood floors between 1/2 - 3/4 inches thick. Used by many contractors and DIY floor installers this tool works well for all skill levels. The sturdy long handle allows for great control and keeps you from breaking your back. The nail magazine holds 100 floor nails, and nail length can vary between 1 1/2" to 2" depending on what you need. The air inlet is standard 1/4". Air consumption is low at 4.5 CFM and allows you to use a small compressor. Input pressure should be controlled between 60 and 100 PSI. With a little practice this tool will allow you to lay hundreds of square feet per day. Depending on the type of wood you will need to vary the input pressure. Bamboo is very hard and brittle and requires a low pressure to prevent damage. Teak and some other very dense hard woods will require 100 PSI. You should test on a piece of scrap plank to make sure you are getting good results. The pneumatic flooring nailer is used by placing it on the edge of a piece of hardwood flooring. The included mallet is then used to strike the actuator and fire the nail in. The most difficult part of the process is just moving the pneumatic flooring nailer around. Include in the kit is a Carrying Case, Pneumatic Flooring Nailer , Safety Glasses, Air Tool Oil, Base Plate, S3 Hex Key S4 Hex Key S5 Hex Key Wrench, and Instruction Manual.

Simpson Swan Secure T15N200FNB 15-Gauge 316 Stainless Steel 2-Inch Angle Finish Nails for Bostitch Angle Finish Tools, 500 Per Box

Simpson Swan Secure T15N200FNB 15-Gauge 316 Stainless Steel 2-Inch Angle Finish Nails for Bostitch Angle Finish Tools, 500 Per Box Review

Simpson Swan Secure T15N200FNB 15-Gauge 316 Stainless Steel 2-Inch Angle Finish Nails for Bostitch Angle Finish Tools, 500 Per Box Feature

• 316 Stainless Steel for maximum corrosion protection in the harshest environments
• 2-Inch 15-Gauge Bostitch style angle finish nails
• 500 Per Box
• Fits Bostitch 15-Gauge angle finish nailers
• See www.swansecure.com for more technical information

Standard nails can bleed through paint or cause streaks on your stain grade work. These high quality stainless steel nails eliminate these worries. Stainless Steel nails are most often used in projects where they are exposed to weather or in highly humid areas. However, woods such as Redwood and Western Cedar have high levels of tannic acid, which can cause staining with standard nails. Pressure treated lumber can have similar problems due the chemical reaction between the copper salts used in the treating process and the commonly used galvanized nail. Using Stainless Steel nails can help avoid having to replace or refinish your project because of discoloration or fastener failure. Furthermore, stainless steel nails have a lateral strength 20 higher than ordinary plain steel nails; stiffness is about the same.

Cleat Nailer Kit Hardcore Tools®

Cleat Nailer Kit Hardcore Tools® Review

Cleat Nailer Kit Hardcore Tools® Feature

• Pneumatic floor cleat nailer made of heavy die cast aluminum for professional results
• Easy to use with mallet and instructions included, simple maintenance and consistent results
• Save hundreds on cleat nailer rental and own your own tool, just buy the cleat nails at Home Depot
• Use any compressor between 60-100 psi, includes base plates for 1/2" to 3/4" floor installations
• Returns for UNUSED PRODUCT in ORIGINAL PACKAGING. MUST be within 7 DAYS from the date of Receipt.

Cleat Nailer for installing hardwood floors between 1/2 - 3/4 inches thick. Used by many contractors and DIY floor installers this tool works well for all skill levels. The sturdy long handle allows for great control and keeps you from breaking your back. The nail magazine holds 100 cleat nails, and nail length can vary between 1 1/2" to 2" depending on what you need. The air inlet is standard 1/4". Air consumption is low at 4.5 CFM and allows you to use a small compressor. Input pressure should be controlled between 60 and 100 PSI. With a little practice this tool will allow you to lay hundreds of square feet per day. Depending on the type of wood you will need to vary the input pressure. Bamboo is very hard and brittle and requires a low pressure to prevent damage. Teak and some other very dense hard woods will require 100 PSI. You should test on a piece of scrap plank to make sure you are getting good results. The cleat nailer is used by placing it on the edge of a piece of hardwood flooring. The included mallet is then used to strike the actuator and fire the cleat nail in. The most difficult part of the process is just moving the cleat nailer around. Include in the kit is a Carrying Case, Cleat Nailer , Safety Glasses, Air Tool Oil, Base Plate, S3 Hex Key S4 Hex Key S5 Hex Key Wrench, and Instruction Manual. Good luck on installing your new hard wood floor.